Machinery technical file
M.S.G. 30x20
- Our conceptual M.S.G. machine is based on pneumatic impact technology and is controlled by a microprocessor.
- The size of the machine is about 2 square metres: 254 x 146 x 76 cm.
- Its output is 1000 boxes per hour.
- The approximate weight is 650 kg.
- Electrical supply: AC. 220 - 500w (the machine is supplied without an electricity cable; a cable with a three pin plug should be used x 2.5mm2 flexible and multiphase)
- Air supply and quick start: 6 bar (air hose with an exterior diameter of 12mm) the machine is supplied without a compressor.
- 500 - 600/litres of compressed air supplied per minute.
Lid placing machine
- As with the M.S.G. machine, the lid-placing machine is based on various electropneuamtic components controlled by an automation devise.
- The size of the machine is about 2 square metres: 108 x 112 x 140 cm
- Its output is about 1000 boxes per hour.
- The approximate weight is 160 kg.
- Electrical supply: AC. 220 - 500w (the machine is supplied without an electricity cable; a cable with a three pin plug should be used x 2.5mm2 flexible and multiphase)
- Air supply and quick start: 6 bar (air hose with an exterior diameter of 12mm)
- 500 - 600/litres of compressed air supplied per minute.
M.S.G. 30x25
- The control system is based on an automation device and a monophasic frequency converter among other devices.
- Its size is about 3 square metres: 215 x 135 x 195 cm.
- Its output is about 960 boxes per hour.
- The approximate weight is 950 kg.
- Electrical supply: AC. 220 - 500w (the machine is supplied without an electricity cable; a cable with a three pin plug should be used x 2.5mm2 flexible and multiphase)
- Air supply and quick start: 6 bar (air hose with an exterior diameter of 12mm)
- 600 litres of compressed air supplied per minute.
